5.4.1 Fatigue Strength at Room
Temperature
Mechanical Properties (Section 5)
(1) Warren, K.A. and Reed, R.P. Tensile and Impact Properties of Selected Materials from 20 to 300 RE. US Dept Commerce, Nat. Bureau of Monograph 63 (1963).
(2) Colbeck, E.W. and McGillivray, W.E. The Mechanical Properties of Metals at Low Temperatures, (Part 2 - Non-Ferrous Materials). Trans. Instn. Chem. Engrs, Vol. 11 ( 1933), pp. 107-123.
(3) Russell, H.W. Effect of Low Temperatures on Metals and Alloys. ASTM-ASME Symposium on Effect of Temperature on the Properties of Metals (1931), pp. 658-682.
(4) Private communication from Imperial Metal Industries Limited, England.
(5) Ashbolt, D. and Bowers, J.E. The Properties of Copper and Copper Alloys at Elevated Temperatures. BNFMRA Research Report A1550 (1965), July.
(6) Upthegrove, C. and Burghoff, H.L. Elevated-Temperature Properties of Coppers and Copper-Base Alloys. American Society for Testing and Materials, Philadelphia Pa. (1956); (ASTM Spec. Tech. Pub. No. 181).
(7) Price, W.B. Properties of Copper and Some of its Important Industrial Alloys at Elevated Temperatures. ASTM-ASME Symposium on Eflect of Temperature on the Properties of Metals (1931), pp. 340-367.
(8) Clark, C.L. and White, A.E. Properties of Non-Ferrous Alloys at Elevated Temperatures. Trans. ASME, Vol. 43 (1931), pp. 183-191.
(9) Burghoff, H L. and Blank, A.l. Fatigue Properties of Some Coppers and Copper Alloys in Strip Form. Proc. ASTM, Vol. 48 (1948), pp. 709-736.
(10) Favor, R.J. et al. Investigation of Fatigue Behavior of Certain Alloys in the Temperature Range Room Temperature to -423 F. WADD Technical Report 61-132 (1961), June. Directorate of Materials & Processes, Contract No. AF 33 (616)—6888, Project No. 7351.
(11) Tyler, C.M., Jr. Influence of Temper on the Fatigue Strength of Cartridge Brass (Alloy 260) Sheet. Mater. Res. Standards, Vol. 7 (1967), pp. 59-64.
(12) Burghoff, H.L. and Blank, A.l. Fatigue Characteristics of Some Copper Alloys. Proc. ASTM, Vol. 47 (1947), pp. 695 712.
(13) Kommers, J.B. The Static and Fatigue Properties of Brass. Proc. ASTM Vol. 31 (1931), Pt. 2, pp. 243 258.
(14) McAdam D.J., Jr. Eflect of Cold Working on Endurance and Other Properties of Metals, Part 1. Trans. ASST, Vol. 8 (1925), pp. 782-822.
(15) Forrest, P.G. and Tate, A.E.L. The Influence of Grain Size on the Fatigue Behaviour of 70,30 Brass. J. Inst. Metals, Vol. 93 (1964-65), pp. 438-444.
(16) Burghoff, H.L. and Blank, A.l. Fatigue Tests on Some Copper Alloys in Wire Form. Proc. ASTM, Vol. 43 (1943), pp. 774-784.
